TRS-DV

AVM (Automatic Voltage Metering)
The device is equipped with unique AVM module, which guarantees that the controller operation is enabled only when all three phases are present and the voltage falls into specified range. Otherwise the hoist controller stops to ensure safe operation.

 

APA (Automatic Phase Align)
This feature automatically detects the rotation of phases on mains. In case of inversion, the motor controller aligns the phases automatically to provide safe UP/DOWN operation.

 

GCT
Group Control Technology offers simple control of multiple channels via single switch of the CMG remote. The control behavior can be programmed using the USB programmer.

 

AHD Digital Link
AHD Advanced Digital linking of several devices together makes their GO and E-STOP buttons work at the same time on all units in chain. Controller works in MASTER/SLAVE mode. It also offers the advanced link features like LINK disconnection, GROUP control of hoist by single directional switch and additional functionalities like transfer of various command messages across linked network

 

GROUP STOP
GST unit is equipped with the GROUP STOP functionality. This means that if any of the hoist protection devices like MCB or Motor Starter is activated by an overload, the controller stops its operation and requires an action. Moreover, in the link mode, all units that are linked come to halt in order to offer highest lever of safety.

 

MOTOR STARTER
This optional feature can be fit into most controllers. Several legal authorities require the MOTOR STARTER instead of common circuit breakers as the protection of hoist/motor.

 

SIL3 E-STOP
Certified built-in safety relays guarantee safe E-STOP functionality under all conditions. Unit with this technology conforms to the latest requests of safety defined by the Machinery Directive.

 

SW UPDATE
Software update is a feature that uses a USB to RS485 cable for the software update. Using the SW-UPG cable, devices that are not equipped with a USB port can be connected to the computer. (Some restriction may apply!)

 

SRS THERMAL MANAGEMENT
SRS devices are 100% duty cycle rated – they can run at full load, continuously, for any length of time without overheating. The heat sink is big enough to keep the temperature on low level that guarantees reliability and long time functionality. That is the reason why our units are more than 30% heavier than competitors’ units.

 

CE certified
All SRS products are CE certified and safe to use according the safety, machinery or low voltage directives.